Extract Pit File From Samsung Firmware Unbrick Guide Droidwin

On the other hand, OnePlus has all its partition files loaded inside the payload.bin file. To extract this BIN file and get hold of its files, you will need a standalone tool. Furthermore, Oppo and Realme have their firmware inside the OZIP package. This again requires a separate tool for extraction. But you might ask why do we need to extract the firmware package? Well, it is mostly needed for two purposes, to root your device by patching the stock boot.img via Magisk and flashing it via Fastboot Commands. The other use of this is to unbrick your device, which is done by using partition files. Upon extracting the stock firmware, you will get these files belonging to different partitions of your device. These include the likes of system.img, recovery.img, vbmeta.img, boot.img among others. We could then flash all these files individually via fastboot commands to their respective partitions and your device will be up and running. But when it comes to Samsung, everything goes out for a spin. This is because the South Korean giants treat the entire firmware process quite differently. But what is the issue and why is it leading to a few confusions? Let’s check it out! After this, we will list out the steps to extract the PIT file from the Samsung firmware, flash it and then unbrick your device.

The Need to Extract PIT Files from Samsung Firmware

First off, Samsung doesn’t host their firmware on their official site. But you could still download the same from Frija Tool, SamMobile sites among others. But even after downloading and extracting the firmware, you wouldn’t directly find the partition IMG files. Rather, you would get the AP, BL, CP, CSC, and HOME_CSC files having the .tar.md5 extension. So could we flash these files via Fastboot?

In general cases, we use the Fastboot Commands to flash the files to their respective partitions. For example, the command fastboot flash recovery recovery.img instructs the CMD to flash the recovery.img file to the recovery partition. But in the case of Samsung, the flashing is done via Odin. But since we don’ instruct Odin where the files need to be flashed, how does it decide the partition? Well, this is where the Samsung PIT file extracted from the firmware comes in handy.

PIT stands for Partition Information Table, and as is evident from its name, it beholds all the required instructions regarding which file needs to be flashed and in which partition. Odin picks up this file, reads all its associated information, and then carries out the flashing process. For example, I have extracted the PIT file of the Samsung Galaxy S20 device (SM-G980F) and managed to find out the following file names [to know more about their block sizes and partitions, refer to the ‘Samsung PIT File: What’s Inside it’ section at the end of this guide].

ul_key.binsec_efs.imgup_param.binkeystorage.binsteady.binrecovery.imgmodem_debug.binnad_refer.bindqmdbg.imgvbmeta.imgvbmeta_samsung.imgmetadata.imgoptics.imguserdata.img

Alongside these files, there were also a few encrypted information that laid down the instructions on which partition you need to flash these files. So Odin will pick up this PIT file and carry out its flashing process. However. if you end up loading the incorrect PIT file to Odin or even load the PIT file that doesn’t match with the current firmware version, then it would lead to bootloop or soft brick issues. Hence to unbrick your Samsung device, you need to extract the PIT file from the firmware and then flash it. Here are all the required instructions for the same.

How to Install Android 11 (OneUI 3.0) on any Samsung Phone via OdinDowngrade Samsung from Android 11 to Android 10 (OneUI 3.0 to 2.0/2.5)How to Root any Samsung device via Magisk and OdinGuide to Patch Samsung AP Firmware via Magisk

How to Extract Samsung PIT File from Stock Firmware

We have listed the below instructions into separate sections for ease of understanding. Proceed ahead in the exact same sequence as mentioned below. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.

STEP 1: Download Stock Firmware

First and foremost, you will have to download the stock firmware for your Samsung device. While there are quite a few methods of doing so, however, I prefer the Frija Tool. If you also echo this thought, then refer to our detailed guide on How to Download Samsung Stock Firmware/ROM via Frija Tool.

STEP 2: Extract Samsung Firmware

Once the firmware is downloaded, extract it to any convenient location on your PC. You should then get the following five files: AP, BL, CP, CSC, and HOME_CSC. The PIT file is preserved inside the CSC file and hence we will need to extract the CSC file. Here’s how it could be done.

STEP 3: Extract CSC File and get Samsung PIT file

To extract the Samsung PIT file from the CSC firmware file, you will need the 7-ZIP Extraction software. WinZip and WinRAR weren’t able to handle the TAR and MD5 files, so I had to go for the aforementioned software.

Once done, you will get a meta-data folder, some LZ4 files, and the required PIT file. So now that we have extracted the Samsung PIT file from the CSC firmware file, it’s time to flash it onto your device and unbrick it.

New Method to Boot to Recovery Mode on Samsung OneUI 3.0 Android 11How to Stop Samsung Find My Device Offline Finding NotificationsSteps to Create Samsung Combination Firmware and Flash it via OdinHow to Boot Rooted Samsung to Recovery Mode and Rooted OS

How to Flash Samsung PIT File and Unbrick your Device

Here are the required instructions to flash the Samsung PIT file onto your device and then unbrick it. Follow along.

STEP 1: Install Odin

Well, there’s no points in guessing that we would use the Odin Tool to flash this PIT file. So download and install it onto your PC from the given link: Odin3-v3.14.4.zip. Once downloaded, extract it on your PC and double click on the Odin3_v3.14.4.exe file to launch the tool.

STEP 2: Boot your Samsung device to Download Mode

Next up, you will have to boot your device to the Download Mode so that Odin is able to interact with your device. You may refer to this guide to do so: How to Boot any Samsung Device to Download Mode. Here are the shorter instructions for the same:

STEP 3: Flash Samsung PIT File via Odin

With this, we conclude the guide on how to extract a PIT file from the Samsung firmware file, flash it onto your device via Odin and then unbrick it. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.

How to Pass SafetyNet test after installing Xposed or EdXposedHow to Pass Magisk SafetyNet on Rooted Android 11Fix No WiFi, Calls, Network after Root or Custom ROMHow to Fix ctsProfile Mismatch Error on Rooted Android

Samsung PIT File: What’s Inside it

The normal extraction of the PIT file (after removing the binary value) gives out the following information.

On the other hand, if you are looking for the complete information, including the binary value, then here’s what I got.

Furthermore, the conversion of the PIT file to an XML file was able to give out some useful information. Here’s just a little snippet of the same: In some instances, you might also get the Values in HEX format, as shown below (Here the columns corresponds to ) So these were all the technical details that I could accrue from my own testing as well as from trusted developer sources from XDA. If you have further insights into all these, do share your valuable information with us it the comments.